Chicago.
2027.

Chicago again in 2027, building on our first US date on November 17, 2026. If November does not work for you, register here and you will hear first when the 2027 date is set.

PlannedOne day, hands-onOne router per seat

Register first, hear first

This date is planned and not yet on sale. Registering is free and commits you to nothing. When the date is confirmed, registered contacts get the booking link before the public announcement.

Registered interest also shapes the plan. Tell us which days you would book and it feeds directly into what we run.

Can you make November 17, 2026? Chicago is booking now.

What we can tell you now

  • Planned for 2027.
  • Date and venue to be confirmed.
  • November 17, 2026 is booking now.
  • Pricing published with the date.

Five modules, each paired with a lab

Every module is hands-on. You leave having done the work, not just watched it. This is deliberately not a certification course and not a replacement for PCSS, PCA or PCE. It sits alongside them as the practical day that shows how the kit actually behaves on a live site.

  1. 1

    InControl2 at scale

    Fleets, groups, config templates, and the workflows that stop large estates becoming unmanageable. By the end of this lab your router is on the venue network, broadcasting your own SSID, and enrolled in your own InControl2 organization.

  2. 2

    Cellular, done right

    SIM selection, band locking, signal, antennas, MIMO and placement, then Starlink brought into a hybrid, resilient WAN. The physical layer most deployments get wrong.

  3. 3

    SpeedFusion

    Bonding, hot failover, WAN smoothing and FEC, plus PepVPN and FusionHub topologies, built and tested on the bench.

  4. 4

    Outbound and inbound routing

    Policy-based routing, outbound rules, port forwarding, inbound access and NAT behavior. The part that separates a working install from a right one.

  5. 5

    Live troubleshooting

    The builds you made in modules one to four get broken on purpose. You diagnose and fix them live, with a repeatable method you take home.

If the day runs ahead and the group can take it, a bonus sixth module on high availability.

Who it is for: Installers, integrators and network engineers already working with Peplink, or about to be. You should be comfortable with basic networking. You do not need to be an expert; that is what the day is for.

Planned for 2027: advanced days

From 2027 we plan to run advanced days alongside the Masterclass, one topic at a time, for engineers who already deploy Peplink. Where there is demand, a date can run as two days back to back: the Masterclass, then an advanced day. Tell us which you would book.

Advanced configuration

Routing, firewall rules, QoS and bandwidth management, multi-WAN designs beyond the defaults, and Synergy Mode for combining the WANs of several routers.

Register interest

SpeedFusion in depth

Bonding, hot failover, WAN smoothing and FEC tuned for real links, FusionHub topologies, and how to prove a tunnel is doing its job.

Register interest

Broadcast and live events

Bonded uplinks for live video, venue networks that have to be built in a day, and the failure modes that only appear once the crowd arrives.

Register interest

Fault finding

A full day of broken builds. Structured diagnosis, the tools on the router, and the evidence to take to a carrier or a vendor.

Register interest

Cellular and antennas

Bands, carriers, antenna choice and placement, LEO alongside cellular, and measuring signal rather than guessing.

Register interest

InControl2 at scale

Fleet structure, groups and templates, alerting, and the workflows that keep hundreds of devices manageable.

Register interest

High availability and failover

Router pairs, redundant WANs and power, and designing for the failure you have not had yet.

Register interest

Maritime and marine

Connectivity at sea and in port: cellular and LEO working together, coverage gaps, and managing vessels remotely.

Register interest

How the first date went

Delegates working on Peplink hardware at their benches during the UK Masterclass
Every bench working, kit and cabling everywhere.

Our first Masterclass ran at The Arden Hotel, near Birmingham Airport, on 1 October 2026. A router on every bench and a day built almost entirely around labs. The room worked through all five modules and the bonus high availability session.

The best moment was not on the agenda. Once delegates had found their serving cell, one of them stood up as a human mast, holding a directional antenna toward the tower while the room watched the signal change.

Register for Chicago, United States, 2027

Two quick questions: which cities you would attend, and which days you would book. We have ticked Chicago, United States for you; add any other dates that work.

1 Where would you attend?

Tick every city that works for you.

2 Which days would you book?

Tick all that interest you. This decides what we run in each city.

3 About you

Written by Adam Steadman

Adam Steadman

Adam Steadman

The Tech Factory, course author

Adam wrote the Masterclass, its five labs and every piece of material that goes with it, and taught the first date in Birmingham himself. He is a Peplink Certified Engineer Trainer with twenty-five years in IT and networking, known across the Peplink community as Agent Adam.

Adam on LinkedIn

The next date on sale: Chicago.

The practical Peplink day, on real hardware, on Goose Island, Chicago, on November 17, 2026.

See Chicago
Chicago, United States, 2027. Planned, not yet on sale. Register Interest